Skip to content

Serial Pi Adaptor

Description

The 4D Pi Serial Adaptor (4D-Serial-Pi-Adaptor) is a simple Raspberry Pi* adaptor designed to provide a convenient interface to attach 4D Systems display modules to the Raspberry Pi platform, without having to use jumper wires on the Raspberry Pi headers.

The 4D Pi Serial Adaptor is included in various 4D Systems PI Module Packs but can be purchased separately if a 4D Display Module is not required or is owned already.

Communication to the 4D Systems Display Modules is performed via the Raspberry Pi's serial port (RX and TX) and is provided to the user in a simple 5-pin interface, where a 5-way cable (included in the -PI Module Packs) can be attached between the adaptor and the Display Module.

Power for the display is supplied from the Raspberry Pi's 5V bus. No external power is required for the Display Module as all power is supplied from the Raspberry Pi, via the Adaptor. Please ensure the Raspberry Pi is powered with a suitably powered 5V power pack.

The 4D Serial Pi Adaptor is compatible with versions A, B and B+ Raspberry Pi's.

The 4D Serial Pi Adaptor is compatible with essentially all 4D Systems Intelligent Displays, primarily the following:

  • uLCD-24PT
  • uLCD-28PT
  • uLCD-32PT
  • uOLED-96-G1/G2
  • uOLED-128-G1/G2
  • uOLED-160-G1/G2
  • uLCD-144-G1/G2
  • uLCD-43 (All versions)
  • uLCD-24-PTU
  • uLCD-28-PTU
  • uLCD-32-PTU
  • uLCD-32W-PTU
  • uLCD-35DT
  • uLCD-70DT
  • uLCD-220RD

The 4D Raspberry Pi Library is available to download from the 4D Systems website.

4D Pi Serial Adaptor

4D Pi Serial Adaptor

4D Pi Serial Adaptor attached to a Raspberry Pi

4D Pi Serial Adaptor attached to a Raspberry Pi

4D Pi Display Module Pack (4D Pi Serial Adaptor is one part of this pack)

4D Pi Display Module Pack
(4D Pi Serial Adaptor is one part of this pack)

Note

Raspberry Pi remains the property of the Raspberry Pi Foundation. All references to the words 'Raspberry Pi' are Trademarks of the Raspberry Pi Foundation, and all references to 4D Systems modules/adaptors with the Raspberry Pi are based on compatibility with the Raspberry Pi Hardware and do not indicate ownership of or to the Raspberry Pi in any way.

Specifications

Recommended Operating Conditions

Parameter Conditions Min Typ Max Units
Supply Voltage (VCC) 4.5 -- 5.5 V
Operating Temperature -10 -- +70 °C
UART Voltage Raspberry Pi is 3.3V only. 4D System modules are 3.3V also but are 5V tolerant -- 3.3 -- V

Ordering Information

Order Code: 4D-Serial-Pi-Adaptor
Package: 65mm x 50mm x 30mm
Packaging: Module sealed in antistatic foam padded 4D Systems Box